LSM Technologies

Orlaco are at this time the ONLY Camera that is compliant and can replace the additional three (3) mirrors required by the new regulation.

The following deals with the new EU Transport Law for Front / Side View for all Cab- over Vehicles which was made mandatory in Jan 2007.

Orlaco are at this time the ONLY Camera that is compliant and can replace the additional three (3) mirrors required by the new regulation.

Over the last few of years, a lot of attention has been focused on improving
the safety of danger areas around commercial vehicles. One of the most
important hazardous zones are the blind spots, the area around a vehicle
where the driver has very little or no visibility.

The European Union has been forced to apply measures regarding traffic safety due to the increasing dangers caused by the large number of elevated trucks on the roads. The result of these measures is an implementation of mandatory European visibility regulations regarding a certified front view system for all new
commercial trucks.

Orlaco’s certified front camera complies fully with the latest European guidelines and can be fitted to every model or type of commercial vehicle

The European visibility guidelines state that the area up to two meters to the front of the vehicle’s cabin needs to be fully visible to the driver.

This area may only be made visible with the use of a certified front view system. We at Orlaco are ready for this challenge and able to provide you with a front camera that complies fully with these European regulations. We have also paid a lot of attention to design. The unit is small and inconspicuous and yet, thanks to its advanced technology, still able to provide a high quality, crystal clear image.

Imagine the increase in Public Safety if this was implemented in Australia!

If you need more information then please Contact Us


Orlaco- the only Camera Certified to the New Cab- over Vision Laws

Printable PDF

Download this news item as a printable PDF file.

This website and its contents © LSM Technologies Pty Ltd. All rights reserved.